Improving Heat Exchanger Network Design of a Revamped Chemical Plant
DOI:
https://doi.org/10.17509/ijost.v2i1.5992Keywords:
Pinch analysis, Industrial system, Utility, Payback Period, Heat exchangerAbstract
Pinch analysis has been known as one of the tools for smart energy management. This technique has successfully been applied in more than three decades in various industries. Here, the purpose of this study was to describe how to use pinch analysis for improving heat exchanger network design of a revamped chemical plant. In a revamping project of a chemical plant, the pinch analysis is applied to find a better design. The analysis reveals that the revamped case can be further improved to achieve more energy saving. This is done by applying one of the golden rules in pinch analysis, which is not to transfer heat across the pinch. The proposed solution is rather simple and straightforward, leading to only few months of payback period and 165 k€ per annual saving.
Downloads
References
Adams, T. A., & Seider, W. D. (2006). Semicontinuous distillation with chemical reaction in a middle vessel. Industrial and engineering chemistry research, 45(16), 5548-5560. DOI: https://doi.org/10.1021/ie051139r
Aspelund, A., Berstad, D. O., & Gundersen, T. (2007). An extended pinch analysis and design procedure utilizing pressure based exergy for subambient cooling. Applied thermal engineering, 27(16), 2633-2649. DOI: https://doi.org/10.1016/j.applthermaleng.2007.04.017
Douglas, J. M. (1985). A hierarchical decision procedure for process synthesis. AIChE journal, 31(3), 353-362. DOI: https://doi.org/10.1002/aic.690310302
Feng, X., & Zhu, X. X. (1997). Combining pinch and exergy analysis for process modifications. Applied thermal engineering, 17(3), 249-261. DOI: https://doi.org/10.1016/S1359-4311(96)00035-X
Kazantzi, V. (2006). Novel visualization and algebraic techniques for sustainable development through property integration (Doctoral dissertation, Texas A&M University).
Kemp, I. C. (2005). Reducing dryer energy use by process integration and pinch analysis. Drying technology, 23(9-11), 2089-2104. DOI: https://doi.org/10.1080/07373930500210572
Linnhoff, B. (1993). Pinch analysis: a state-of-the-art overview: Techno-economic analysis. Chemical engineering research and design, 71(5), 503-522.
Putra, Z. A. (2016). Early phase process evaluation: Industrial practices. Indonesian journal of science and technology, 1(2), 238-248. DOI: https://doi.org/10.17509/ijost.v1i2.3808
Stankiewicz, A. I., & Moulijn, J. A. (2000). Process intensification: transforming chemical engineering. Chemical engineering progress, 96(1), 22-34.
Varbanov, P. S. (2014). Energy and water interactions: implications for industry. Current opinion in chemical engineering, 5, 15-21. DOI: https://doi.org/10.1016/j.coche.2014.03.005
Wang, G. Q., Xu, Z. C., & Ji, J. B. (2011). Progress on Higee distillation—Introduction to a new device and its industrial applications. Chemical engineering research and design, 89(8), 1434-1442. DOI: https://doi.org/10.1016/j.cherd.2011.02.013
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
