High-Performance Cementitious Matrix using Carbon Nanofibers
Keywords:
Cementitious Nanocomposites, Carbon Nanofibers, High PerformanceAbstract
Graphite nanomaterials would realize their reinforcement potential within cement-based materials when they are thoroughly dispersed and effectively bonded to cement hydrates. Thorough dispersion of graphite nanomaterials in the fresh cementitious matrix encounters challenges associated with the hydrophobic nature of nanomaterial surfaces and their strong tendency towards agglomeration via attractive van der Waals forces. Effective interfacial interactions with cement hydrates are further challenged by the relatively inert nature of nanomaterial surfaces. An experimental program was conducted with the objective of effectively utilizing both acid-oxidized and pristine carbon nanofibers towards reinforcement of high-performance cementitious pastes. Hybrid reinforcement systems comprising optimum volume fraction of carbon nanofibers and micro-scale fibers were also evaluated in cementitious matrices. The improvements in nanofiber dispersion and interfacial interactions resulting from acid-oxidation and use of proper dispersion techniques were found to bring about significant gains in the engineering properties of high-performance cementitious materials.
Downloads
References
Bui, D. D., Hu, J., & Stroeven, P. (2005). Particle size effect on the strength of rice husk ash blended gap-graded Portland cement concrete. Cement and concrete composites, 27(3), 357-366.
Chen, S. J., Collins, F. G., Macleod, A. J. N., Pan, Z., Duan, W. H., & Wang, C. M. (2011). Carbon nanotube–cement composites: A retrospect. The IES journal part a: Civil & structural engineering, 4(4), 254-265.
D'Ambrosia, M. (2012). Early age creep and shrinkage of emerging concrete materials (Doctoral dissertation, University of Illinois at Urbana-Champaign).
Hammel, E., Tang, X., Trampert, M., Schmitt, T., Mauthner, K., Eder, A., & Pötschke, P. (2004). Carbon nanofibers for composite applications. Carbon, 42(5), 1153-1158.
Lafdi, K., Fox, W., Matzek, M., & Yildiz, E. (2008). Effect of carbon nanofiber-matrix adhesion on polymeric nanocomposite properties: Part II. Journal of nanomaterials, 2008, 5.
Lawrence, J. G., Berhan, L. M., & Nadarajah, A. (2008). Elastic properties and morphology of individual carbon nanofibers. ACS nano, 2(6), 1230-1236.
Metaxa, Z., Konsta-Gdoutos, M., & Shah, S. (2010). Carbon nanofiber-reinforced cement-based materials. Transportation research record: Journal of the transportation research board, (2142), 114-118.
Peyvandi, A., & Soroushian, P. (2015). Structural performance of dry-cast concrete nanocomposite pipes. Materials and structures, 48(1-2), 461-470.
Peyvandi, A., Soroushian, P., Balachandra, A. M., & Sobolev, K. (2013). Enhancement of the durability characteristics of concrete nanocomposite pipes with modified graphite nanoplatelets. Construction and building materials, 47, 111-117.
Sanchez, F., & Ince, C. (2009). Microstructure and macroscopic properties of hybrid carbon nanofiber/silica fume cement composites. Composites science and technology, 69(7), 1310-1318.
Sbia, L. A., Peyvandi, A., Soroushian, P., Balachandra, A. M., & Sobolev, K. (2015). Evaluation of modified-graphite nanomaterials in concrete nanocomposite based on packing density principles. Construction and building materials, 76, 413-422.
Shofner, M. L., Lozano, K., Rodríguez‐Macías, F. J., & Barrera, E. V. (2003). Nanofiber‐reinforced polymers prepared by fused deposition modeling. Journal of applied polymer science, 89(11), 3081-3090.
Xie, X. L., Mai, Y. W., & Zhou, X. P. (2005). Dispersion and alignment of carbon nanotubes in polymer matrix: A review. Materials science and engineering: R: Reports, 49(4), 89-112.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
